9XR basic heli set up Tutorial

Tutorials realized by 9XR users or HK Staff.

9XR basic heli set up Tutorial

Postby old4570 » 24 Mar 2013, 09:37

Well , I thought some one would have posted this by now : But never mind , here goes ...

Image

First you need to set up a new model

Image



Image

in the set up menu , you can rename the model

Image

in heli set up , you chose swash type as 120 for a 450 CP heli

Image

You can set collective to ch11 or allow the Tx do it in the next step

Image

in templates chose heli set up

Image



Image

this will set up your mixes , throttle cut out , and cyclic ...

This is the basics of setting up a helicopter , hope it helps ...
old4570
 
Posts: 18
Joined: 22 Dec 2012, 06:58

Re: 9XR basic heli set up Tutorial

Postby flightinstructor » 20 Apr 2013, 19:53

I have that setting, but when I change b.E. CYC1,2, and 3 from 100% to lets say 80% to have less cyclic, the my Pitch values are chnged also( less pitch )
If I higher the pitch settings ( ch-11) cyclic is also influenced.
I cannot separate this two from each other.
In my Futaba TX, when I change caclic reaktion, max and min Pitch is not changed.

What is going wrong?
flightinstructor
 
Posts: 13
Joined: 19 Jan 2013, 04:19

Re: 9XR basic heli set up Tutorial

Postby solentlife » 09 Apr 2014, 14:46

None of your pictures display ...... even if I try to force IE to accept.

OK - Questions :

Why does Curves fill up with so many curves input's ? On my usual radios - radiolink and 9x ... have Idle-Up and non Idle-Up curves for each ... throttle and pitch ... so why so many here ?

It's a pity that the er9x write-ups don't explain a little better in plain lingo instead of great leaps of faith in many sections.

Already I find that even simple throttle cut is not same as write-up.

Some templates refuse to keep AETR set-up and swap to others ....

A full write-up WITHOUT using template would be a real benefit so we can all understand what's going on instead of trusting original author of template. There's no indication about 3 pos switch, DR / Expo, Pots altering Pitch / Throttle / hover etc./ as in 9x ...
I've been with Heli's for quite a few years and I find the template and er9x set-up confusing.

Nigel
solentlife
 
Posts: 13
Joined: 03 Mar 2014, 03:48


Return to Tutorials

Who is online

Users browsing this forum: No registered users and 0 guests

cron