9xr pro Mod gone wrong

You are addict of Hardware / Electronics / Tuning modifications on your 9XR, this place is for you !

9xr pro Mod gone wrong

Postby cocojack42 » 27 May 2015, 04:21

Hello,

I've removed some connectors I didn't need (but I needed the holes where they were).

These connectors were both trainer ports.
Now the Radio doesn't power up completely (and plays a scratching noise through the speakers).

Could this be the problem? I've removed the Futaba Connector on the deck and the RDX/TDX wire to the futaba connector.
The problem is, I didn't made any Photos before unsoldering it, so I cant't change it back, to see if this was the mistake.

In addition I've used the SD Card in my mobius to test something.

I have some electrical engineering experiences, but I'm a rookie to 9XR modding.
(and forgive my bad English skills, I usually don't need them)
cocojack42
 
Posts: 2
Joined: 27 May 2015, 04:12

Re: 9xr pro Mod gone wrong

Postby cocojack42 » 27 May 2015, 06:39

I just noticed the LCD backlight is flickering...
cocojack42
 
Posts: 2
Joined: 27 May 2015, 04:12


Return to 9XR Mods

Who is online

Users browsing this forum: No registered users and 0 guests

cron