No 6V supply on JR module slot

Ask for support here, and get answer by the community !

No 6V supply on JR module slot

Postby kikibald » 29 Aug 2013, 12:34

hello, I just bought a new 9XR and everything seemed to work OK. Yesterday I got my OrangeRX 2.4 transmittermodule and put it in my 9XR. I couldn´t start the LED on the module blinking so i tried to measure the pins on the JR module slot. There is battery voltage but no 6V. Is my new 9XR broken or is there any setting to switch the 6V on/off ? If its broken is there a chance to repair it by myself (scheme) ?
kikibald
 
Posts: 1
Joined: 29 Aug 2013, 12:15

Re: No 6V supply on JR module slot

Postby ShowMaster » 01 Sep 2013, 14:51

Does the module need 6v? If its the orange Spektrum dsm clone it only need ppm in battery voltage and ground to work. Top #1pin is ppm in, #3 pin is + battery and #4 pin is ground.
No connection to pins 2 and 5.
User avatar
ShowMaster
 
Posts: 194
Joined: 25 Dec 2012, 16:10

Re: No 6V supply on JR module slot

Postby ShowMaster » 01 Sep 2013, 14:53

If its a new module with no prior damage just bind it to your receiver. Some DSM modes will not cause a led to light up. If it binds it's working.
User avatar
ShowMaster
 
Posts: 194
Joined: 25 Dec 2012, 16:10


Return to Community Help & Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron