Setting Up 9XR for My WL Toys V929 & V949's?

Ask for support here, and get answer by the community !

Setting Up 9XR for My WL Toys V929 & V949's?

Postby JerryB » 20 Apr 2013, 19:48

I have been flying these fun little quads for quite some time now with a Turnigy 9X and have gotten that pretty well dialed in. I just recently bought the 9XR and a FlySky module and I am at a complete loss! I would say I can't even get off the ground, but actually that's not my problem whatsoever, it's the opposite!
I get the quads to bind with the 9XR, but they're operating at about half throttle as soon as the radio boots up. I really don't understand the the whole set-up procedure involved apparently, and can't find a well done, straightforward tutorial online anywhere that explains this process. Does anybody know of such a thing anywhere?
JerryB
 
Posts: 7
Joined: 20 Apr 2013, 19:34

Re: Setting Up 9XR for My WL Toys V929 & V949's?

Postby GhostMaster » 24 Apr 2013, 19:22

You need to configure some thing on the radio, look at youtube for some tutorials.

Maybe this helps:

http://www.youtube.com/watch?v=hH6Ibbd3Qv4
GhostMaster
 
Posts: 2
Joined: 24 Apr 2013, 19:05

Re: Setting Up 9XR for My WL Toys V929 & V949's?

Postby JerryB » 26 Apr 2013, 18:36

This video is for the Turnigy 9X, not the 9XR, so it doesn't help whatsoever.
JerryB
 
Posts: 7
Joined: 20 Apr 2013, 19:34

Re: Setting Up 9XR for My WL Toys V929 & V949's?

Postby JerryB » 26 Jul 2013, 00:08

It's very hard for me to believe that there is no one out there flying any of the WL Toys V929's or V949 quads with the new Turnigy 9XR radios? I purchased one of these to replace my older 9X and have found it totally useless because I CANNOT figure this damned thing out. It's total overkill to the point of being a complete hinderance to most users.
I found this "forum" that I thought surely could help me, and now have found it to be as useless as my Turnigh 9XR radio!
Surely to God, there's somebody, or some site out there, that can provide a usable YouTube video of the process of doing this setup???????? :x
JerryB
 
Posts: 7
Joined: 20 Apr 2013, 19:34

Re: Setting Up 9XR for My WL Toys V929 & V949's?

Postby diegojjd » 11 Aug 2013, 04:46

This is the mix that I use to fly my v929 fpv. Its simple and works.
Attachments
uploadfromtaptalk1376167494181.jpg
diegojjd
 
Posts: 1
Joined: 25 Dec 2012, 20:32

Re: Setting Up 9XR for My WL Toys V929 & V949's?

Postby cruisin_psu » 15 Aug 2013, 00:34

i'm very interested in this topic as well. except for use with the WL Toys V202 microquad

For the above mix.. what else is required? How do you bind the transmitter? Are you using the Flysky module in your 9XR? Do you need to flash the 9XR with non stock firmware?

I have a FrSky TX module.. will I be able to get this to work?

Thanks!
cruisin_psu
 
Posts: 1
Joined: 14 Aug 2013, 12:34


Return to Community Help & Support

Who is online

Users browsing this forum: No registered users and 1 guest