You are addict of Hardware / Electronics / Tuning modifications on your 9XR, this place is for you !


Postby MadScientist » 21 Jan 2013, 14:02

is there plenty of room for the voice module in this bad boy?
Posts: 5
Joined: 18 Jan 2013, 06:27

Re: voice

Postby rob.thomson » 21 Jan 2013, 15:21

Pretty sure you asked the same question on 9xforums.com.

Things are much tighter in the 9xR.

Probably will be possible to squeeze in in, but not been done yet.

Give it a bit of time and someone will no doubt work something out.

User avatar
Posts: 75
Joined: 28 Dec 2012, 18:43

Re: voice

Postby MadScientist » 22 Jan 2013, 03:41

well if you guys can give me a parts list, ill order them up and as soon as i get them ill try to make it fit. if there isnt room, i guess maybe i could use a smaller battery and put it in the battery tray.
Posts: 5
Joined: 18 Jan 2013, 06:27

Re: voice

Postby ShowMaster » 22 Jan 2013, 07:04

The voice option may use more current and drain the tx battery so going smaller will only require more frequent charging. Not a big deal since just a few years ago we usually charged before each time we went flying.
There is another option for the voice electronics, use the Hitec method and hang it outside I'm a box.
Maybe rewire the Futaba trainer connector, if it has enough pins, to carry all the required data and power for the add on module. In fact, it could have been prewired for that and HK would have had a new option accessory to sell.
Works for Hitec.
User avatar
Posts: 194
Joined: 25 Dec 2012, 16:10

Re: voice

Postby MadScientist » 22 Jan 2013, 09:45

if that ends up being needed, i dont have a problem putting anything external..as long as its clean. Would this thing really kill a lipo that fast though?
Posts: 5
Joined: 18 Jan 2013, 06:27

Re: voice

Postby HC1969 » 15 Feb 2013, 14:46

Posts: 2
Joined: 28 Dec 2012, 18:20

Re: voice

Postby Zector » 06 Mar 2013, 15:39

Im starting to put in the MegaSound 9x. I have most of it figured out, except the "beeper" lead. I am following these instructions:

http://www.rc-miskolc.emiter.hu/rc-misk ... Itemid=150

The only part im stumped on is the beeper/transistor removal, and using that lead into the sound board. Here is a couple pics of the board the beeper is on:

https://picasaweb.google.com/1067079893 ... directlink

Can anyone help?

Posts: 6
Joined: 15 Feb 2013, 02:13

Re: voice

Postby zupratom » 20 Apr 2015, 22:11

Have you figered it out? I'm stucked at the same point... Can't find better install instructions for 9xr than this: http://blog.naver.com/azure93andy/120194875155.
Posts: 1
Joined: 07 Apr 2015, 18:08

Return to 9XR Mods

Who is online

Users browsing this forum: No registered users and 0 guests